User Manual
Hardware version
CANBench TrueZ v1.1 — Fabricated prototype, sole built unit. V1.1 is electrically identical to the V1.2 schematic refresh but predates the InvenTree symbol-library migration; the schematic component metadata reflects legacy SCADYS naming. Testing and bench validation reference this V1.1 hardware.
Other versions: v1.2 — schematic refresh (next version)
Operator manual for the CANBench TrueZ — the common-mode / differential-mode separation stage that sits between a CANBench Duo LISN and a spectrum analyser. Pick the page you need.
| Page | What's on it |
|---|---|
| Quick Start | Cable the TrueZ between the Duo's two LISN outputs and the analyser, then sweep |
| Spectrum-Analyser Setup | Analyser configuration; the mandatory 50 Ω-input requirement |
| Measurement Procedure | Noise-floor check, baseline, CM sweep, DM sweep, low-end correction |
| Common Pitfalls | Mistakes that produce wrong CM/DM readings and how to avoid them |
| Interpreting Results | Reading the CM vs DM split and choosing the right mitigation |